91&

LDI-619-600-A010S_LDI-619-750-A010S_LDI-619-2.5-A020S位移傳感器OMEGA

The LDI-619 Series LVIT (Linear Variable Inductive Transducer) position sensors from OmegaTM are contactless devices designed for factory automation and a variety of industrial and commercial applications such as motor sport vehicles, automotive testing, solar cell positioners, wind turbine prop pitch and brakes, and packing equipment. With their compact device, rugged stainless-steel construction, superior performance, and excellent stroke-to-length ratio, the LDI-619 sensors are ideal for both industrial testing, laboratories, and OEM applications.

產品參數

LDI-619-600-A010S_LDI-619-750-A010S_LDI-619-2.5-A020S位移傳感器OMEGA

模擬I/O：

0至10V輸出，12至30V輸入，最大35 mA；

4至20 mA（3線）輸出，18至30V輸入，60 mA最大75°C（167°F最大）

測量范圍：2.5至900 mm（磴“至36”）滿刻度

線性誤差：典型滿刻度輸出（fso）的±0.15%，最大為±0.25%

分辨率：fs的0.025%

更新率：300赫茲，額定值

工作溫度：-20至85°C（-4至185°F）

溫度系數：fs/°C的0.015%

振動：5至20赫茲，0.5“p-p；20至2000赫茲，4.2 g p-p

沖擊：1000 g，11 ms

終端：IEC IP67

濕度：95%相對濕度，無冷凝

外殼材料：不銹鋼

產品介紹

LDI-619-600-A010S_LDI-619-750-A010S_LDI-619-2.5-A020S位移傳感器OMEGA

Contactless operation Prevents Wearout from Dithering or Cycling

Excellent stroke-to-length ratio

Rugged 19 mm (0.75") Diameter stainless steel housing

Field adjustable range scaling

Wide Choice of Range: 15 to 750 mm (?” to 30") Full Scale

Designed to Operate Under Adverse Temperature, Vibration, Shock, and Humidity Conditions

Applications

PV Solar Cell Positioner

Wind Energy Systems

Packaging Machinery

Motorsport Vehicles

Automotive Testing

Factory Automation

OEM Test Stands

The LDI-619 Series LVIT (Linear Variable Inductive Transducer) position sensors from OmegaTM are contactless devices designed for factory automation and a variety of industrial and commercial applications such as motor sport vehicles, automotive testing, solar cell positioners, wind turbine prop pitch and brakes, and packing equipment. With their compact device, rugged stainless-steel construction, superior performance, and excellent stroke-to-length ratio, the LDI-619 sensors are ideal for both industrial testing, laboratories, and OEM applications.

LDI-619 sensors are offered in 15 full scale ranges from 15 to 900 mm (? to 36"). Calibration and set-up is simplified with one wire field programming feature, this provides the ability to match the end points of the sensor's analog output with the ends of the range of motion of the assembly to which the sensor is attached. This feature permits a user to optimize the position measuring system's resolution over its full range of motion.

LDI-619 products come with axil exiting cable & a M5 x 0.8 threaded end for installation.

Specifications

Analog I/Os:

0 to 10V output with 12 to 30V input, 35 mA max;

4 to 20 mA (3-wire) output with 18 to 30V input, 60 mA max 75°C (167°F max)

Measuring Range: 2.5 to 900 mm (?” to 36") Full Scale

Linearity Error: ±0.15% of Full Scale Output (FSO) typical, ±0.25% max

Resolution: 0.025% of FS

Update Rate: 300 Hz nominal

Operating Temperature: -20 to 85°C (-4 to 185°F)

Temperature Coefficient: 0.015% of FS/°C

Vibration: 5 to 20 Hz, 0.5" p-p; 20 to 2000 Hz, 4.2 g p-p